Window tints are typically applied to the inside surface of a window, although they can also be applied to the outside surface in some cases. The inside surface is generally preferred because it allows for easier installation and makes it easier to remove or replace the tint if necessary. It also helps to protect the tint from damage caused by weather and other external factors. If you are considering having window tints installed, it is important to follow the manufacturer’s instructions and recommendations to ensure that the tints are applied correctly and will perform as intended. Let’s dive deep into the pros and cons of both the options:

The Inside vs. Outside Debate

One of the most common questions when it comes to window tints is whether they should be installed on the inside or the outside of the window. Both options have their own set of pros and cons, and the decision ultimately depends on individual preferences and needs.

• Easier to install: Installing window tints on the inside of a window is generally easier than doing so on the outside. It requires less equipment and expertise, and there is less risk of damaging the window or the tint film.
• More privacy: Window tints on the inside of a window provide more privacy, as they are not visible from the outside. This can be especially useful in homes or offices where privacy is a concern.
• Protection from the elements: Window tints on the inside of a window are better protected from the elements, such as wind, rain, and sunlight. This can help to extend the lifespan of the tints.

Cons:

• Less durable: Window tints on the inside of a window are generally less durable than those on the outside, as they are not exposed to the elements. They may peel, bubble, or fade over time, requiring more frequent replacements.
• Limited options: There are typically fewer options available for window tints that are installed on the inside, as they are not designed to withstand the same level of wear and tear as those on the outside.

Installing window tints on the outside:

Pros:

• Greater durability: Window tints on the outside of a window are generally more durable and long-lasting than those on the inside. They are better able to withstand the elements and are less prone to fading or peeling.
• More options: There are generally more options available for window tints that are installed on the outside, as they are designed to withstand more wear and tear. This includes a wider range of colors, shades, and patterns.
• Better heat and glare reduction: Window tints on the outside of a window are more effective at reducing heat and glare from the sun, as they are better able to block UV rays.

Cons:

• More difficult to install: Installing window tints on the outside of a window is generally more difficult than doing so on the inside. It requires specialized equipment and expertise, and there is a higher risk of damaging the window or the tint film.
• Reduced privacy: Window tints on the outside of a window provide less privacy, as they are visible from the outside.
• More prone to damage: Window tints on the outside of a window are more prone to damage from the elements, such as wind, rain, and sunlight.
• In conclusion, the decision of whether to install window tints on the inside or outside of a window depends on individual preferences and needs. Both options have their own set of pros and cons, and it is important to carefully consider all of the factors before making a decision.

Installation of Window Tints

Installing window tints can be a daunting task, but with the right tools and techniques, it can be done relatively easily. Here is a step-by-step guide to installing window tints on either the inside or outside of a window:

Gather the necessary tools and materials: You will need window tint film, a razor blade or cutting tool, a spray bottle filled with soapy water, a squeegee, a ruler or measuring tape, and a clean, dry cloth.

Measure and cut the tint film: Measure the size of the window and cut the tint film to the appropriate size, allowing for a few inches of excess on all sides. Use a straightedge and a cutting tool to ensure a precise cut.

Clean the window: Thoroughly clean the window with a window cleaner and a dry, lint-free cloth to remove any dirt, dust, or debris.

Apply the soapy water: Spray a thin layer of soapy water onto the window and the tint film. This will help to prevent the tint film from sticking too firmly to the window and allow for adjustments during the installation process.

Apply the tint film: Carefully place the tint film onto the window, starting at the top and working your way down. Use a squeegee to smooth out any air bubbles or wrinkles.

Trim the excess film: Use a straightedge and a cutting tool to trim away any excess film around the edges of the window.

Remove the water and bubbles: Use a squeegee to remove any remaining water and air bubbles from under the tint film. Wipe away any excess water with a clean, dry cloth.

Allow the tint film to cure: Allow the tint film to cure for at least 24 hours before washing the windows or exposing them to direct sunlight. This will help to ensure that the tint film adheres properly to the window.

It is important to follow these steps carefully to ensure a successful installation. If you are not confident in your ability to install the window tints yourself, it is recommended to hire a professional to do the job.

Maintenance and Care of Window Tints

Proper maintenance and care of your window tints can help them last longer and retain their original appearance. Here are some tips for maintaining and caring for your window tints:

Avoid harsh cleaners: Harsh cleaners can damage or discolor window tints, so it’s important to use a gentle cleaner specifically designed for window tints. Avoid using abrasive or acidic cleaners, as well as paper towels or other rough surfaces that may scratch the tint.

Wipe away dirt and debris: Regularly wiping away dirt, dust, and other debris from your window tints can help prevent scratches and damage. Use a soft, clean cloth and gentle cleaner to remove any buildup.

Avoid excessive heat: Extreme heat or direct sunlight can cause window tints to fade or bubble over time. To help protect your tints, try to keep your car in a shaded area or use a sunshade when parked in direct sunlight.

Avoid sharp objects: It’s important to be mindful of any sharp objects that may come into contact with your window tints. Avoid carrying sharp objects in your car or placing them on or near your window tints, as they can cause scratches or other damage.

Repair any damage promptly: If your window tints become damaged or start to peel, it’s important to have them repaired or replaced as soon as possible. Allowing damage to go unrepaired can lead to more extensive and costly repairs down the line.

By following these tips, you can help ensure that your window tints remain in good condition and continue to provide the benefits you desire.

Conclusion

In conclusion, window tints offer a wide range of benefits for both residential and commercial properties. From reducing glare and heat to providing privacy and security, window tints can greatly improve the functionality and appearance of a building. 

The typical location for window tints is the inside of a window, but there are instances where they may be applied to the outside surface as well.

Whether you choose to install window tints on the inside or outside of your windows, it is important to carefully consider your options and follow proper installation and maintenance procedures to ensure the best results.