Tinting your car windows can be a great way to improve the appearance and privacy of your vehicle, but it’s important to avoid making common mistakes that could ruin the final result. Here are seven common tinting mistakes to avoid when tinting your car windows:

Not Following Local Tinting Regulations

It’s essential to follow local laws and regulations regarding car window tinting to avoid fines or legal issues. These regulations can vary significantly from one location to another, so it’s important to research the specific rules in your area before tinting your car’s windows.

Common violations to avoid include tinting the front windows too dark, tinting the windshield above the AS-1 line (the upper 6 inches), and using a tint film that does not meet the minimum level of visibility. It’s also important to ensure that the tint film meets any other requirements or restrictions in your area, such as the level of UV protection or the level of reflection.

To comply with local tinting regulations, it’s important to research the specific rules in your area and select a tint film that meets these requirements. You can also consult with a professional window tinting company or your local DMV for more information and guidance on compliant tinting options.

Not Cleaning the Windows Before Tinting

One of the most common mistakes made during car window tinting is not properly cleaning the windows before application. It’s essential to remove any dirt, dust, or contaminants from the surface of the windows before applying the tint film. If these contaminants are not removed, they can affect the adhesion of the tint and cause it to peel or bubble over time.

To properly clean the windows, start by using a mild soap solution and a microfiber cloth to wipe away any dirt or grime. Next, use a window cleaner specifically designed for tinting to remove any remaining contaminants. Make sure to thoroughly dry the windows with a lint-free cloth before proceeding with the tinting process.

It’s also important to avoid using any harsh chemicals or abrasive materials when cleaning the windows. These can damage the surface of the glass and interfere with the adhesion of the tint film.

Choosing the Wrong Tint Film

Another common mistake when tinting car windows is choosing the wrong film. There are many different types of tint film available on the market, each with its own specific features and benefits. It’s important to select a film that meets your needs and preferences, as well as complies with local tinting laws and regulations.

When choosing a tint film, consider factors such as the level of darkness you want, the level of UV protection you need, and the level of heat rejection you desire. Different films offer varying levels of these features, so it’s important to do your research and select the right film for your specific needs.

It’s also important to avoid purchasing low-quality or counterfeit tint film. These types of film may be cheaper, but they are more likely to peel, fade, or bubble over time. Instead, invest in a reputable brand of tint film to ensure a long-lasting and high-quality result.

Incorrectly Measuring and Cutting the Tint Film

Accurately measuring and cutting the tint film is crucial for a successful tinting job. If the film is not cut correctly, it will not fit the window properly and may result in gaps, overlaps, or uneven edges.

To accurately measure the windows, start by using a tape measure to determine the size and shape of each window. Next, transfer these measurements onto a piece of paper and use a ruler to draw a precise outline of the window. This will serve as a template for cutting the tint film.

When cutting the tint film, it’s important to use a sharp blade and a straightedge to ensure clean, precise cuts. Avoid using dull blades or freehand cutting, as these can result in jagged or irregular edges. It’s also important to leave a small margin around the edges of the film to allow for proper installation and trimming.

Failing to Remove Air Bubbles and Creases

After the tint film is applied to the window, it’s essential to remove any air bubbles or creases to ensure a smooth, professional finish. These imperfections can be caused by a variety of factors, including not using enough solution, using too much heat, or not properly smoothing the film during installation.

To remove air bubbles and creases, start by using a small squeegee to push out any large bubbles towards the edges of the film. For smaller bubbles, you can use a needle or pin to puncture the bubble and then smooth it out with the squeegee.

It’s also important to avoid using too much heat when removing air bubbles and creases. Excessive heat can cause the tint film to shrink or distort, resulting in further imperfections. Instead, use a low-heat hair dryer or heat gun set to a low temperature to gently warm the film and make it more pliable. This will make it easier to smooth out any remaining imperfections.

After the bubbles and creases have been removed, it’s important to continue smoothing the film with the squeegee to ensure a flat, even surface. If necessary, use a heat source to carefully shrink the film and remove any remaining wrinkles or creases.

Skipping the Cure Time

After the tint film is applied and smoothed, it’s essential to allow it to properly cure before using the windows. The curing process allows the tint film to bond with the glass and reach its full adhesion strength. Skipping this process can result in peeling or bubbling of the film over time.

The amount of time needed for the tint film to cure can vary depending on factors such as the type of film used, the humidity and temperature of the environment, and the age of the film. As a general rule, it’s recommended to wait at least 72 hours before using the windows, and to avoid washing the windows or exposing them to excessive heat or sunlight during this time.

To properly care for the tinted windows during the curing process, avoid rolling down the windows or applying pressure to the film. You can also use a protective cover or tape to shield the windows from the elements and prevent damage during this time.

Neglecting Maintenance and Repair

Proper maintenance and repair of tinted windows can help extend their lifespan and keep them looking their best. Neglecting to care for the tinted windows can result in issues such as peeling, fading, or bubbling of the film.

To maintain the tinted windows, avoid using harsh chemicals or abrasive materials when cleaning the film. Instead, use a mild soap solution and a soft, lint-free cloth to gently wipe away dirt and grime. You can also use a specialized window tint cleaner to help preserve the film’s color and clarity.

If any damage does occur to the tint film, it’s important to address it promptly to prevent it from spreading or worsening. Small tears or punctures can often be repaired using a tint repair kit, while larger damages may require the assistance of a professional.

By avoiding these 7 common tinting mistakes, you can ensure that your car’s windows are properly tinted and look great for years to come.